Serius Soft Acidic Water Generator Hygine Managing System “Serius”
Serius water is generated once hypochlorous acid soda ( Authorized Food additive ) and chloride ( Authorized Food additive ) are mixed and diluted by the unit "Serius".The power of disinfection is equal to 80 times of hypochlorous acid soda. We assure that this must be easy handling & quite safety to the operator & its environment.
It is lower cost as compared with conventional hygiene system.The hygiene management in several kind of place is required these days. This machine for the hygiene management system in broad fields, such as the food industry and a medical institution effectively.
Model | NDX-1500PLB |
---|---|
Rating | AC100V 4.4A 50/60Hz |
Size | W800mm×H1275mm×D553mm |
Feed-water pressure | 0.25~0.75MPa(2.5~7.5kgf/cm2) Necessaey to attach 0.25MPa decompression value |
Water temperature | 5~35℃ without freesing and condensation |
Amount of generated water | Max 1,500L/h(25L/min) When dynamic water pressure is 0.25MPa |
pH | Almost 4.5~7.8 |
Concentreation of hydrochoric acid | Almost 100ppm・200ppm(or 50ppm・100ppm) |
Safeguard | pH measuring device |
Solution water | Food additive sodium hypochlorire:12% |
Food additive hydrochoric acid:8.5% |
Hi-Clo Soft Acidic Water Generator “Well Clean-Te Excellent”NDX-80KME
Model | NDX-80KME |
---|---|
Volume(main unit) | W260mm×H361mm×D120mm |
Weight | 4kg |
Rationg | AC100V 1.0A 50/60Hz |
Water Temperature | 0~35℃ (without condensation) |
Amount of generated water | 10L(Can be set from 1 to 200L) |
Generation Capacity | 2.0L/min |
pH | 5.0-6.5 (food additives) (standard range 5.0-7.0) * Varies depending on raw water. |
Effrctive chlorine concentration | 3-step switching 35/50/80 mg / L (ppm) * Reference value: Depends on the quality of tap water. |
Running Time | Standard 30 seconds (setting time can be changed from 10 to 120 seconds) |
Electrolytic cell replacement | About 5 years using 30L a day (depending on water quality and quantity) |
Hi-Clo Soft Acidic Water Generator “Well Clean-Te Neo”NDX-50KMN
Model | NDX-50KMN |
---|---|
Volume(main unit) | W260mm×H361mm×D120mm |
Weight | 4kg |
Rationg | AC100V 0.8A 50/60Hz |
Water Temperature | 0~35℃ (without condensation) |
Amount of generated water | 10L(Can be set from 1 to 200L) |
Generation Capacity | 2.6L/min |
pH | 5.0-6.5 (food additives) (standard range 5.0-7.0) * Varies depending on raw water. |
Effrctive chlorine concentration | 30~50mg/L(ppm) |
Running Time | Standard 30 seconds (setting time can be changed from 10 to 120 seconds) |
Electrolytic cell replacement | About 5 years using 30L a day (depending on water quality and quantity) |
Hi-Clo Soft Acidic Water Generator “Well Clean-Te Plus” NDX-65KM-H(P)
Model | NDX-65KM-H(P) |
---|---|
Volume(main unit) | W240mm×H350mm×D201mm |
Weight | 5.5kg |
Rationg | AC100V 2.7A 50/60Hz |
Water Temperature | 0~35℃ (No freezing) |
Amount of generated water | About 600L with 1.5L additive liquid |
Generation Capacity | 2.0L / min (at 0.15MPa) |
pH | 5.0-6.5 (food additives) (standard range 5.0-7.0) * Varies depending on raw water. |
Effrctive chlorine concentration | 50~70mg/L(ppm) |
Running Time | 7・10・15・60seconds/10mins |
Electrolytic cell replacement | About 2 years (depending on the amount and quality of water) |
Hi-Clo Soft Acidic Water Generator “Well Clean-Te Plus” NDX-65KM-H(P2)
Model | NDX-65KM-H(P2) |
---|---|
Volume(main unit) | W240mm×H350mm×D201mm |
Weight | 5.5kg |
Rationg | AC100V 2.7A 50/60Hz |
Water Temperature | 0~35℃ (No freezing) |
Amount of generated water | About 350L with 1.5L additive liquid |
Generation Capacity | 2.0L / min (at 0.15MPa) |
pH | 5.0-6.5 (food additives) (standard range 5.0-7.0) * Varies depending on raw water. |
Effrctive chlorine concentration | 80mg/L(ppm) |
Running Time | 7・10・15・60seconds/10mins |
Electrolytic cell replacement | About 2 years (depending on the amount and quality of water) |
Hi-Clo Soft Acidic Water Generator “Portable Clean-Te” NDX-CSG270J
Model | NDX-CSG270J |
---|---|
Volume(main unit) | W75mm×H265mm×D75mm |
Weight | 310g (main unit only) |
Power input | DC 5V/1A |
Amount of generated water | 280ml |
pH | 5.0-6.5 * Varies depending on the raw water. |
Effrctive chlorine concentration | 2 steps: 40-60, 60-80mg / L (ppm) * Varies depending on raw water |
Built-in rechargeable battery | Lithium-ion battery 3.7V / 1,600mAh |
Charging time | 4 Hours |
Electrode | Titanium platinum electrode |
Hi-Clo Soft Acidic Water Generator “Aquacid” NDX-70KMW
Model | NDX-70KMW |
---|---|
Volume(main unit) | W277mm×H348mm×D227mm |
Weight | Almost 9.5kg |
Rationg | AC100V 3A 50/60HZ |
Water Temperature | 0~35℃ (without condensation) |
Amount of generated water | 70L/H |
Generation Capacity | 1.2L/min |
pH | 4.0~6.0 |
Effrctive chlorine concentration | 50~80mg/L(ppm) |
Loading solution | Dedicated loading solution for Hi-Clo-Soft water (20L tank) |
Running Time | Continuous operation |
Electrobath replacement cyde | Almost 2 yeaers (depends on water quarity) |
Hi-Clo Soft Acidic Water Generator “Well Clean TE” NDX-65KM-H
Model | NDX-65KM-H |
---|---|
Volume(main unit) | W240mm×H350mm×D201mm |
Weight | Almost 5.5kg |
Rating | AC100V 2.7A 50/60HZ |
Water Temperature | 0~35℃ (without condensation) |
Almost of generated water | Almost 600L with 1.5L of solution water |
Generation Capacity | 2.0L/min (@0.15MPa) |
pH | 6.0~7.0(depends on the row water) |
Effective chlonine concentration | 50~70mg/L(ppm) |
Loading solution | Dedicated loading solution for Hi-Clo-Soft Water (plastic bottle) |
Operation method | Opical sensor method |
Running Time | 7,10,15,60 sec/10min |
Electrobath replacement cyde | Almost 2years(depents on water quality) |